Reset for samsung CLP-510 printer

Reset for samsung CLP-510 printer

Solutions for resetting Image Unit, Fuser, Transfer Roll, MP Pick-up, Tray 1 Pick-up


Enter Test mode. The following tasks must be completed within 10 seconds or the printer will default to the Ready mode:

1. Turn printer off.
2. Press and hold “ONLINE and “CANCEL” keys while simultanously turning on the printer.
3. When the message “Download Mode/Press Online Key” is displayed immediately press and hold the “MENU” key for one second.
4. Wait for 1 second.
5. Press and hold the “ENTER” key for one second.
6. Wait for “Select Test Mode/EDC Mode” to be displayed. This will occur within 5 seconds or the printer will default to the Ready mode.

Enter the EDC mode. 

1. Press "Enter" key to access EDC mode. 
2. "Press access key" is displayed. It is the "Cancel" key. Press it.
3. "EDC Mode/Motor Test" is displayed.
4. Press the “Forward Arrow” key until the message "EDC Mode/Maintenance" is displayed.
5. Press the "Enter" key to access the various maintenance parameters.
6. To step through the following components: "image unit", "fuser", "transfer roll", "MP pich-up", "Tray 1 pick-up" Press the "Forward Arrow" key.
7. Select the component you wish to reset and press "Enter".
8. The displayed component will "Initialize" resetting the count to 0. 
9. When the component initialization is complete "xxx Initialized" will be displayed.

Return to the Ready mode by turning the printer off, and then back on.

Title : Reset for samsung CLP-510 printer
Posted by : Unknown
Published : 2012-10-15T06:58:00-07:00
Rating : 5
Reviewer : 79198 Reviews

Tweet