Resetter Canon MP287
![]() |
Canon MP287 |
Early Signs of Error :
Usually when the Canon MP287 printer is turned on , will be immediately visible warning on the LCD panel error E08 MP287 . Well if you do print or print command , the warning appears on the monitor screen " The Ink Absorber is Almost Full " . See Figure descriptors MP287 error E08 on the screen as below :
![]() |
Error E08 MP287 |
Resetter Canon MP287
How to Fix Error E08 Canon MP287 follow the following steps :
- Turn Printer Canon MP287 , MP287 LCD panel then will appear E08 error , and no description of " The Ink Absorber is Almost Full " screen of your monitor .
- Get Resetter MP287 click here .
- Make sure that Canon MP287 Printer Service in a state Mode.Dengan following way .
- Canon MP287 please turn off by pressing the Power button . Do not unplug the power cord .
- Then press and hold the Stop / Reset while pressing the Power button .
- After that release the Stop / Reset but do not release the Power button .
- Next when the Power button is pressed , you simply press the STOP / RESET six times .
- Then release both buttons simultaneously . That way Canon MP287 printer will be in the Service Mode .
- On LCD Panel MP287 will appear blank or dark , and if your computer detects the new hardware then ignore it .
- The next step is Exctract then you run the Service Tool MP287
- At Clear Ink Absorber Counter menu please select and click on SET Main on the right .
- And the Ink Absorber Counter menu you select Play then click SET on the right .
- Then you click EEOPROM . Then the printer will print 1 page . After that Canon MP287 Printer Error E08 you are experiencing will soon be back to normal and ready for use .
Resetter Canon MP287
Resetter Canon MP287

Posted by :
Published : 2013-10-30T17:24:00-07:00
0 Response to " Resetter Canon MP287 Download"
Post a Comment